• May


  • 259
  • 0

How to unblock a shower in SW5

In order to unclog a shower drain, there are different methods that you can apply and see if they work. Dealing with a blocked shower SW5 is never a nice thing. There are some steps that you can use to unclog the drain and get it back in the best working condition. What you should do
A shower drain is never a very difficult one to handle, especially when a clog occurs within. Typically the clog is rather straightforward and easy to handle. A plunger is one of the oldest methods that have been applied to clear a blocked shower drain. For this to work well, you need to make sure that the cap is covered by water. This is because water will not compress and will therefore exert so much pressure on the clog once you start plunging. As you plunge, you should be able to feel the water as it moves within the drain. The back and forth eventually builds up the needed force so as to deal with the blockage and dislodge it. If this doesn’t handle your blocked shower SW5, try repeating the same process a few times.
If the plunger doesn’t work, you need to use an auger and this is what you should work into the drain. Sometimes, a simple coat hanger hooked at the end can work like magic. You need to straighten it first and then hook it at the tip. The best hook needs to be small to be effective. If you feel the blockage as you move the hanger in, start twisting it around so as to get it all around the wire as you pull out. Repeat this until the time all the clogs have been cleared.
Refrain from using chemicals as they can take a toll on the pipes.


You comment will be published within 24 hours.

Cancel reply


Use our form to estimate the initial cost of renovation or installation.

Latest Posts
Most Viewed
Text Widget

Here is a text widget settings ipsum lore tora dolor sit amet velum. Maecenas est velum, gravida Vehicula Dolor